We had lots of fun putting up
new door and window
trim.
You know the lovely builders grade
windows do not come with any
trim work. So we added that.
Doesn't that look so much better?!
We used decorative corner pieces,
not sure what the technical
term is, but that's
what is under the tape.
We glued them
so the tape is holding them on
until the glue dries.
We also wanted to add chuckier
baseboards. But with
the budget being what it is
we decided to follow the
lead of some fellow bloggers out there
and do some "pretend" chucky
baseboards.
We found a baseboard that matched
the original, then my Handyman used a
wood piece as a spacer and then
nailed the new base upside down above the original.
It might look funny at the moment
but wait for the magic of paint.
One last addition...
A
MEGA
shelf. I am hoping that it will
bring some life to this boring wall.
It is approximately 15ft. long.
The brilliant HH came up with
the design plan.
He bought the long shelf.
(I wanted it to be at least 5" wide)
he also bought the
crown molding to go under it.
But HH didn't like the amount of space
that was left under the shelf.
He felt like it was too much empty space, so...
He bought another piece of wood that he
stood up underneath the long shelf
behind the crown molding.
Does that make sense?
So, basically it is behind the molding
and pushes it out so that there is not as much
space in the front. It also offers a
little dimension to the bottom of
the shelf too.
There is also a small wood rail
placed on the top edge of the shelf to
kind of act as a plate rail (so things don't fall off)
Is that a plate rail?
Oh, I almost forgot to mention,
we took the baseboard that supports the shelf
(the purple X)
and wrapped that all the way around the room.
Oh, I almost forgot to mention,
we took the baseboard that supports the shelf
(the purple X)
and wrapped that all the way around the room.
Any who...
Now to prep for painting.
Why is the prep work always
so much more work than
the actual painting?
That drives me crazy!
1 comment:
WOW! Where did you get an HH that would make your base boards cunky! I want one!
Post a Comment